PWCT 1.9 Art Documentation ( http://doublesvsoop.sourceforge.net )

2006-2019, Mahmoud Fayed ( msfclipper@users.sourceforge.net )

_____________________________________________________________________________________

Table of contents

1 - Introduction

2 - Implementation steps

3 - Final Steps Tree

4 - Application during the runtime

1 - Introduction

In this lesson we are going to learn how to create the Boom application.

2 - Implementation Steps

s1.JPG

Fig. (1) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Declare Array)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Declare Array)

                Note : Stop typing when you see the required component is selected

s2.JPG

Fig. (2) Component Browser – Select the component (Declare Array)

After selecting the component click Ok or press ENTER

s3.JPG

Fig. (3) Interaction page - Set the properties and enter the required data as in the image above

s4.JPG

Fig. (4) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

s5.JPG

Fig. (5) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

s6.JPG

Fig. (6) Interaction page - Set the properties and enter the required data as in the image above

s7.JPG

Fig. (7) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

s8.JPG

Fig. (8) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

s9.JPG

Fig. (9) Interaction page - Set the properties and enter the required data as in the image above

s10.JPG

Fig. (10) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

s11.JPG

Fig. (11) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

s12.JPG

Fig. (12) Interaction page - Set the properties and enter the required data as in the image above

s13.JPG

Fig. (13) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

s14.JPG

Fig. (14) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

s15.JPG

Fig. (15) Interaction page - Set the properties and enter the required data as in the image above

s16.JPG

Fig. (16) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

s17.JPG

Fig. (17) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

s18.JPG

Fig. (18) Interaction page - Set the properties and enter the required data as in the image above

s19.JPG

Fig. (19) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

s20.JPG

Fig. (20) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

s21.JPG

Fig. (21) Interaction page - Set the properties and enter the required data as in the image above

s22.JPG

Fig. (22) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

s23.JPG

Fig. (23) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

s24.JPG

Fig. (24) Interaction page - Set the properties and enter the required data as in the image above

s25.JPG

Fig. (25) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Windows)

                3 - Select the component (Define New Window)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define New Window)

                Note : Stop typing when you see the required component is selected

s26.JPG

Fig. (26) Component Browser – Select the component (Define New Window)

After selecting the component click Ok or press ENTER

s27.JPG

Fig. (27) Interaction page - Set the properties and enter the required data as in the image above

s28.JPG

Fig. (28) Form Designer

s29.JPG

Fig. (29) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Button)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Button)

                Note : Stop typing when you see the required component is selected

s30.JPG

Fig. (30) Component Browser – Select the component (Button)

After selecting the component click Ok or press ENTER

s31.JPG

Fig. (31) Interaction page - Set the properties and enter the required data as in the image above

s32.JPG

Fig. (32) Form Designer

s33.JPG

Fig. (33) Goal Desginer - Steps Tree

Select the step (Button Events)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Events)

                3 - Select the component (Button Events)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Button Events)

                Note : Stop typing when you see the required component is selected

s34.JPG

Fig. (34) Component Browser – Select the component (Button Events)

After selecting the component click Ok or press ENTER

s35.JPG

Fig. (35) Interaction page - Set the properties and enter the required data as in the image above

s36.JPG

Fig. (36) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Image)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Image)

                Note : Stop typing when you see the required component is selected

s37.JPG

Fig. (37) Component Browser – Select the component (Image)

After selecting the component click Ok or press ENTER

s38.JPG

Fig. (38) Interaction page - Set the properties and enter the required data as in the image above

s39.JPG

Fig. (39) Form Designer

s40.JPG

Fig. (40) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Define Procedure)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Procedure)

                Note : Stop typing when you see the required component is selected

s41.JPG

Fig. (41) Component Browser – Select the component (Define Procedure)

After selecting the component click Ok or press ENTER

s42.JPG

Fig. (42) Interaction page - Set the properties and enter the required data as in the image above

s43.JPG

Fig. (43) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (For Loop)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (For Loop)

                Note : Stop typing when you see the required component is selected

s44.JPG

Fig. (44) Component Browser – Select the component (For Loop)

After selecting the component click Ok or press ENTER

s45.JPG

Fig. (45) Interaction page - Set the properties and enter the required data as in the image above

s46.JPG

Fig. (46) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Image Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Image Class)

                Note : Stop typing when you see the required component is selected

s47.JPG

Fig. (47) Component Browser – Select the component (Image Class)

After selecting the component click Ok or press ENTER

s48.JPG

Fig. (48) Interaction page - Set the properties and enter the required data as in the image above

s49.JPG

Fig. (49) Interaction page - Set the properties and enter the required data as in the image above

s50.JPG

Fig. (50) Interaction page - Set the properties and enter the required data as in the image above

s51.JPG

Fig. (51) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Image Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Image Class)

                Note : Stop typing when you see the required component is selected

s52.JPG

Fig. (52) Component Browser – Select the component (Image Class)

After selecting the component click Ok or press ENTER

s53.JPG

Fig. (53) Interaction page - Set the properties and enter the required data as in the image above

s54.JPG

Fig. (54) Interaction page - Set the properties and enter the required data as in the image above

s55.JPG

Fig. (55) Interaction page - Set the properties and enter the required data as in the image above

s56.JPG

Fig. (56) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Code Unit)

                3 - Select the component (Sleep Time)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Sleep Time)

                Note : Stop typing when you see the required component is selected

s57.JPG

Fig. (57) Component Browser – Select the component (Sleep Time)

After selecting the component click Ok or press ENTER

s58.JPG

Fig. (58) Interaction page - Set the properties and enter the required data as in the image above

s59.JPG

Fig. (59) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Image Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Image Class)

                Note : Stop typing when you see the required component is selected

s60.JPG

Fig. (60) Component Browser – Select the component (Image Class)

After selecting the component click Ok or press ENTER

s61.JPG

Fig. (61) Interaction page - Set the properties and enter the required data as in the image above

s62.JPG

Fig. (62) Interaction page - Set the properties and enter the required data as in the image above

s63.JPG

Fig. (63) Interaction page - Set the properties and enter the required data as in the image above

s64.JPG

Fig. (64) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Code Unit)

                3 - Select the component (Sleep Time)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Sleep Time)

                Note : Stop typing when you see the required component is selected

s65.JPG

Fig. (65) Component Browser – Select the component (Sleep Time)

After selecting the component click Ok or press ENTER

s66.JPG

Fig. (66) Interaction page - Set the properties and enter the required data as in the image above

s67.JPG

Fig. (67) Goal Desginer - Final Steps Tree

3 - Final Steps Tree

The First Step

                Declare Array myimages

                Add item "appdata\expl1.bmp" To Array myimages

                Add item "appdata\expl2.bmp" To Array myimages

                Add item "appdata\expl3.bmp" To Array myimages

                Add item "appdata\expl4.bmp" To Array myimages

                Add item "appdata\expl5.bmp" To Array myimages

                Add item "appdata\expl6.bmp" To Array myimages

                Add item "appdata\expl7.bmp" To Array myimages

                Define New Window ( win1 ) , Title : "Boom Sample - by Stephen France"

                                Window Events

                                Window Properties

                                Window Controls

                                                Define New Button ( btn1 ) , Caption : "Press"

                                                                Button Events

                                                                                Event: ON CLICK

                                                                Button Properties

                                                Define New Image ( image1 ) , Image : ""

                                                                Events

                                                                Properties

                                End Of Window

                                Activate window

                Define Procedure Boom

                                Start Here

                                                FOR LOOP ( From x = 1 To 7 Step 1)

                                                                Start Here

                                                                                win1.image1.Picture := myimages[x]

                                                                                win1.image1.Visible := True

                                                                                SLEEP TIME 0.01

                                                                                win1.image1.Visible := False

                                                                                SLEEP TIME 0.01

                                                                End of For Loop

                                End of Procedure

4 - Application during the runtime

runtime1.JPG

Fig. (68) Application during the runtime