PWCT 1.9 Art Documentation ( http://doublesvsoop.sourceforge.net )

2006-2019, Mahmoud Fayed ( msfclipper@users.sourceforge.net )

_____________________________________________________________________________________

Table of contents

1 - Introduction

2 - Implementation steps

3 - Final Steps Tree

4 - Application during the runtime

1 - Introduction

In this lesson we are going to create the Total Cost application.

2 - Implementation Steps

Fig. (1) Goal Desginer - Steps Tree

Select the step (The First Step)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Windows)

                3 - Select the component (Define New Window)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define New Window)

                Note : Stop typing when you see the required component is selected

Fig. (2) Component Browser – Select the component (Define New Window)

After selecting the component click Ok or press ENTER

Fig. (3) Interaction page - Set the properties and enter the required data as in the image above

Fig. (4) Form Designer

Fig. (5) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Label)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Label)

                Note : Stop typing when you see the required component is selected

Fig. (6) Component Browser – Select the component (Label)

After selecting the component click Ok or press ENTER

Fig. (7) Interaction page - Set the properties and enter the required data as in the image above

Fig. (8) Form Designer

Fig. (9) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (TextBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (TextBox)

                Note : Stop typing when you see the required component is selected

Fig. (10) Component Browser – Select the component (TextBox)

After selecting the component click Ok or press ENTER

Fig. (11) Interaction page - Set the properties and enter the required data as in the image above

Fig. (12) Form Designer

Fig. (13) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Label)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Label)

                Note : Stop typing when you see the required component is selected

Fig. (14) Component Browser – Select the component (Label)

After selecting the component click Ok or press ENTER

Fig. (15) Interaction page - Set the properties and enter the required data as in the image above

Fig. (16) Form Designer

Fig. (17) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Label)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Label)

                Note : Stop typing when you see the required component is selected

Fig. (18) Component Browser – Select the component (Label)

After selecting the component click Ok or press ENTER

Fig. (19) Interaction page - Set the properties and enter the required data as in the image above

Fig. (20) Form Designer

Fig. (21) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Label)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Label)

                Note : Stop typing when you see the required component is selected

Fig. (22) Component Browser – Select the component (Label)

After selecting the component click Ok or press ENTER

Fig. (23) Interaction page - Set the properties and enter the required data as in the image above

Fig. (24) Form Designer

Fig. (25) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (TextBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (TextBox)

                Note : Stop typing when you see the required component is selected

Fig. (26) Component Browser – Select the component (TextBox)

After selecting the component click Ok or press ENTER

Fig. (27) Interaction page - Set the properties and enter the required data as in the image above

Fig. (28) Form Designer

Fig. (29) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (TextBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (TextBox)

                Note : Stop typing when you see the required component is selected

Fig. (30) Component Browser – Select the component (TextBox)

After selecting the component click Ok or press ENTER

Fig. (31) Interaction page - Set the properties and enter the required data as in the image above

Fig. (32) Form Designer

Fig. (33) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (TextBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (TextBox)

                Note : Stop typing when you see the required component is selected

Fig. (34) Component Browser – Select the component (TextBox)

After selecting the component click Ok or press ENTER

Fig. (35) Interaction page - Set the properties and enter the required data as in the image above

Fig. (36) Form Designer

Fig. (37) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Button)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Button)

                Note : Stop typing when you see the required component is selected

Fig. (38) Component Browser – Select the component (Button)

After selecting the component click Ok or press ENTER

Fig. (39) Interaction page - Set the properties and enter the required data as in the image above

Fig. (40) Form Designer

Fig. (41) Goal Desginer - Steps Tree

Select the step (Button Events)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Events)

                3 - Select the component (Button Events)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Button Events)

                Note : Stop typing when you see the required component is selected

Fig. (42) Component Browser – Select the component (Button Events)

After selecting the component click Ok or press ENTER

Fig. (43) Interaction page - Set the properties and enter the required data as in the image above

Fig. (44) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (EditBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (EditBox)

                Note : Stop typing when you see the required component is selected

Fig. (45) Component Browser – Select the component (EditBox)

After selecting the component click Ok or press ENTER

Fig. (46) Interaction page - Set the properties and enter the required data as in the image above

Fig. (47) Form Designer

Fig. (48) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (TextBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (TextBox)

                Note : Stop typing when you see the required component is selected

Fig. (49) Component Browser – Select the component (TextBox)

After selecting the component click Ok or press ENTER

Fig. (50) Interaction page - Set the properties and enter the required data as in the image above

Fig. (51) Form Designer

Fig. (52) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Button)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Button)

                Note : Stop typing when you see the required component is selected

Fig. (53) Component Browser – Select the component (Button)

After selecting the component click Ok or press ENTER

Fig. (54) Interaction page - Set the properties and enter the required data as in the image above

Fig. (55) Form Designer

Fig. (56) Goal Desginer - Steps Tree

Select the step (Button Events)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Events)

                3 - Select the component (Button Events)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Button Events)

                Note : Stop typing when you see the required component is selected

Fig. (57) Component Browser – Select the component (Button Events)

After selecting the component click Ok or press ENTER

Fig. (58) Interaction page - Set the properties and enter the required data as in the image above

Fig. (59) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Label)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Label)

                Note : Stop typing when you see the required component is selected

Fig. (60) Component Browser – Select the component (Label)

After selecting the component click Ok or press ENTER

Fig. (61) Interaction page - Set the properties and enter the required data as in the image above

Fig. (62) Form Designer

Fig. (63) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (ComboBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ComboBox)

                Note : Stop typing when you see the required component is selected

Fig. (64) Component Browser – Select the component (ComboBox)

After selecting the component click Ok or press ENTER

Fig. (65) Interaction page - Set the properties and enter the required data as in the image above

Fig. (66) Form Designer

Fig. (67) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (TextBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (TextBox)

                Note : Stop typing when you see the required component is selected

Fig. (68) Component Browser – Select the component (TextBox)

After selecting the component click Ok or press ENTER

Fig. (69) Interaction page - Set the properties and enter the required data as in the image above

Fig. (70) Form Designer

Fig. (71) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Label)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Label)

                Note : Stop typing when you see the required component is selected

Fig. (72) Component Browser – Select the component (Label)

After selecting the component click Ok or press ENTER

Fig. (73) Interaction page - Set the properties and enter the required data as in the image above

Fig. (74) Form Designer

Fig. (75) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (ListBox)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ListBox)

                Note : Stop typing when you see the required component is selected

Fig. (76) Component Browser – Select the component (ListBox)

After selecting the component click Ok or press ENTER

Fig. (77) Interaction page - Set the properties and enter the required data as in the image above

Fig. (78) Form Designer

Fig. (79) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Main Menu)

                3 - Select the component (Define Main Menu)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Main Menu)

                Note : Stop typing when you see the required component is selected

Fig. (80) Component Browser – Select the component (Define Main Menu)

After selecting the component click Ok or press ENTER

Fig. (81) Interaction page - Set the properties and enter the required data as in the image above

Fig. (82) Goal Desginer - Steps Tree

Select the step (MENU POPUPS)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Main Menu)

                3 - Select the component (Define POPUP)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define POPUP)

                Note : Stop typing when you see the required component is selected

Fig. (83) Component Browser – Select the component (Define POPUP)

After selecting the component click Ok or press ENTER

Fig. (84) Interaction page - Set the properties and enter the required data as in the image above

Fig. (85) Goal Desginer - Steps Tree

Select the step (POPUP ITEMS)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Main Menu)

                3 - Select the component (Define Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Item)

                Note : Stop typing when you see the required component is selected

Fig. (86) Component Browser – Select the component (Define Item)

After selecting the component click Ok or press ENTER

Fig. (87) Interaction page - Set the properties and enter the required data as in the image above

Fig. (88) Goal Desginer - Steps Tree

Select the step (Window Controls)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Status Bar)

                3 - Select the component (Status Bar)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Status Bar)

                Note : Stop typing when you see the required component is selected

Fig. (89) Component Browser – Select the component (Status Bar)

After selecting the component click Ok or press ENTER

Fig. (90) Interaction page - Set the properties and enter the required data as in the image above

Fig. (91) Goal Desginer - Steps Tree

Select the step (Items)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Controls)

                3 - Select the component (Date)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Date)

                Note : Stop typing when you see the required component is selected

Fig. (92) Component Browser – Select the component (Date)

After selecting the component click Ok or press ENTER

Fig. (93) Interaction page - Set the properties and enter the required data as in the image above

Fig. (94) Goal Desginer - Steps Tree

Select the step (Items)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Status Bar)

                3 - Select the component (Clock)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Clock)

                Note : Stop typing when you see the required component is selected

Fig. (95) Component Browser – Select the component (Clock)

After selecting the component click Ok or press ENTER

Fig. (96) Interaction page - Set the properties and enter the required data as in the image above

Fig. (97) Goal Desginer - Steps Tree

Select the step (Items)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Status Bar)

                3 - Select the component (Keyboard)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Keyboard)

                Note : Stop typing when you see the required component is selected

Fig. (98) Component Browser – Select the component (Keyboard)

After selecting the component click Ok or press ENTER

Fig. (99) Interaction page - Set the properties and enter the required data as in the image above

Fig. (100) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Windows)

                3 - Select the component (Window Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Window Class)

                Note : Stop typing when you see the required component is selected

Fig. (101) Component Browser – Select the component (Window Class)

After selecting the component click Ok or press ENTER

Fig. (102) Interaction page - Set the properties and enter the required data as in the image above

Fig. (103) Interaction page - Set the properties and enter the required data as in the image above

Fig. (104) Interaction page - Set the properties and enter the required data as in the image above

Fig. (105) Form Designer

Fig. (106) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (107) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (108) Interaction page - Set the properties and enter the required data as in the image above

Fig. (109) Interaction page - Set the properties and enter the required data as in the image above

Fig. (110) Interaction page - Set the properties and enter the required data as in the image above

Fig. (111) Form Designer

Fig. (112) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Combobox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Combobox Class)

                Note : Stop typing when you see the required component is selected

Fig. (113) Component Browser – Select the component (Combobox Class)

After selecting the component click Ok or press ENTER

Fig. (114) Interaction page - Set the properties and enter the required data as in the image above

Fig. (115) Interaction page - Set the properties and enter the required data as in the image above

Fig. (116) Interaction page - Set the properties and enter the required data as in the image above

Fig. (117) Form Designer

Fig. (118) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (119) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (120) Interaction page - Set the properties and enter the required data as in the image above

Fig. (121) Interaction page - Set the properties and enter the required data as in the image above

Fig. (122) Interaction page - Set the properties and enter the required data as in the image above

Fig. (123) Form Designer

Fig. (124) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Scope of Variable)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Scope of Variable)

                Note : Stop typing when you see the required component is selected

Fig. (125) Component Browser – Select the component (Scope of Variable)

After selecting the component click Ok or press ENTER

Fig. (126) Interaction page - Set the properties and enter the required data as in the image above

Fig. (127) Form Designer

Fig. (128) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (129) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (130) Interaction page - Set the properties and enter the required data as in the image above

Fig. (131) Form Designer

Fig. (132) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (133) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (134) Interaction page - Set the properties and enter the required data as in the image above

Fig. (135) Form Designer

Fig. (136) Goal Desginer - Steps Tree

Select the step (Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station")

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (137) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (138) Interaction page - Set the properties and enter the required data as in the image above

Fig. (139) Form Designer

Fig. (140) Goal Desginer - Steps Tree

Select the step (Total Cost Calculation)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Define Function)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Function)

                Note : Stop typing when you see the required component is selected

Fig. (141) Component Browser – Select the component (Define Function)

After selecting the component click Ok or press ENTER

Fig. (142) Interaction page - Set the properties and enter the required data as in the image above

Fig. (143) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (144) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (145) Interaction page - Set the properties and enter the required data as in the image above

Fig. (146) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (147) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (148) Interaction page - Set the properties and enter the required data as in the image above

Fig. (149) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (150) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (151) Interaction page - Set the properties and enter the required data as in the image above

Fig. (152) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (153) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (154) Interaction page - Set the properties and enter the required data as in the image above

Fig. (155) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (156) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (157) Interaction page - Set the properties and enter the required data as in the image above

Fig. (158) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (159) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (160) Interaction page - Set the properties and enter the required data as in the image above

Fig. (161) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (162) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (163) Interaction page - Set the properties and enter the required data as in the image above

Fig. (164) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (165) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (166) Interaction page - Set the properties and enter the required data as in the image above

Fig. (167) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (168) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (169) Interaction page - Set the properties and enter the required data as in the image above

Fig. (170) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (171) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (172) Interaction page - Set the properties and enter the required data as in the image above

Fig. (173) Goal Desginer - Steps Tree

Select the step (Total Cost Calculation)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Define Procedure)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Procedure)

                Note : Stop typing when you see the required component is selected

Fig. (174) Component Browser – Select the component (Define Procedure)

After selecting the component click Ok or press ENTER

Fig. (175) Interaction page - Set the properties and enter the required data as in the image above

Fig. (176) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (177) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (178) Interaction page - Set the properties and enter the required data as in the image above

Fig. (179) Interaction page - Set the properties and enter the required data as in the image above

Fig. (180) Interaction page - Set the properties and enter the required data as in the image above

Fig. (181) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (182) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (183) Interaction page - Set the properties and enter the required data as in the image above

Fig. (184) Interaction page - Set the properties and enter the required data as in the image above

Fig. (185) Interaction page - Set the properties and enter the required data as in the image above

Fig. (186) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (187) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (188) Interaction page - Set the properties and enter the required data as in the image above

Fig. (189) Interaction page - Set the properties and enter the required data as in the image above

Fig. (190) Interaction page - Set the properties and enter the required data as in the image above

Fig. (191) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (192) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (193) Interaction page - Set the properties and enter the required data as in the image above

Fig. (194) Interaction page - Set the properties and enter the required data as in the image above

Fig. (195) Interaction page - Set the properties and enter the required data as in the image above

Fig. (196) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (197) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (198) Interaction page - Set the properties and enter the required data as in the image above

Fig. (199) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (200) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (201) Interaction page - Set the properties and enter the required data as in the image above

Fig. (202) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (GUI Application)

                3 - Select the component (Show Message)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Show Message)

                Note : Stop typing when you see the required component is selected

Fig. (203) Component Browser – Select the component (Show Message)

After selecting the component click Ok or press ENTER

Fig. (204) Interaction page - Set the properties and enter the required data as in the image above

Fig. (205) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Return Value)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Return Value)

                Note : Stop typing when you see the required component is selected

Fig. (206) Component Browser – Select the component (Return Value)

After selecting the component click Ok or press ENTER

Fig. (207) Interaction page - Set the properties and enter the required data as in the image above

Fig. (208) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (209) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (210) Interaction page - Set the properties and enter the required data as in the image above

Fig. (211) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (212) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (213) Interaction page - Set the properties and enter the required data as in the image above

Fig. (214) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (215) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (216) Interaction page - Set the properties and enter the required data as in the image above

Fig. (217) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (GUI Application)

                3 - Select the component (Show Message)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Show Message)

                Note : Stop typing when you see the required component is selected

Fig. (218) Component Browser – Select the component (Show Message)

After selecting the component click Ok or press ENTER

Fig. (219) Interaction page - Set the properties and enter the required data as in the image above

Fig. (220) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Return Value)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Return Value)

                Note : Stop typing when you see the required component is selected

Fig. (221) Component Browser – Select the component (Return Value)

After selecting the component click Ok or press ENTER

Fig. (222) Interaction page - Set the properties and enter the required data as in the image above

Fig. (223) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (224) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (225) Interaction page - Set the properties and enter the required data as in the image above

Fig. (226) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (227) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (228) Interaction page - Set the properties and enter the required data as in the image above

Fig. (229) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (230) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (231) Interaction page - Set the properties and enter the required data as in the image above

Fig. (232) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Return Value)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Return Value)

                Note : Stop typing when you see the required component is selected

Fig. (233) Component Browser – Select the component (Return Value)

After selecting the component click Ok or press ENTER

Fig. (234) Interaction page - Set the properties and enter the required data as in the image above

Fig. (235) Goal Desginer - Steps Tree

Select the step (IF ( win1.combo1.value = 3 ))

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (236) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (237) Interaction page - Set the properties and enter the required data as in the image above

Fig. (238) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Call Procedure)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Call Procedure)

                Note : Stop typing when you see the required component is selected

Fig. (239) Component Browser – Select the component (Call Procedure)

After selecting the component click Ok or press ENTER

Fig. (240) Interaction page - Set the properties and enter the required data as in the image above

Fig. (241) Goal Desginer - Steps Tree

Select the step (Total Cost Calculation)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Define Procedure)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Procedure)

                Note : Stop typing when you see the required component is selected

Fig. (242) Component Browser – Select the component (Define Procedure)

After selecting the component click Ok or press ENTER

Fig. (243) Interaction page - Set the properties and enter the required data as in the image above

Fig. (244) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ASCII code to Character)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ASCII code to Character)

                Note : Stop typing when you see the required component is selected

Fig. (245) Component Browser – Select the component (ASCII code to Character)

After selecting the component click Ok or press ENTER

Fig. (246) Interaction page - Set the properties and enter the required data as in the image above

Fig. (247) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ASCII code to Character)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ASCII code to Character)

                Note : Stop typing when you see the required component is selected

Fig. (248) Component Browser – Select the component (ASCII code to Character)

After selecting the component click Ok or press ENTER

Fig. (249) Interaction page - Set the properties and enter the required data as in the image above

Fig. (250) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (251) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (252) Interaction page - Set the properties and enter the required data as in the image above

Fig. (454) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (254) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (255) Interaction page - Set the properties and enter the required data as in the image above

Fig. (256) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (257) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (258) Interaction page - Set the properties and enter the required data as in the image above

Fig. (259) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (260) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (261) Interaction page - Set the properties and enter the required data as in the image above

Fig. (262) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (263) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (264) Interaction page - Set the properties and enter the required data as in the image above

Fig. (265) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (For Loop)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (For Loop)

                Note : Stop typing when you see the required component is selected

Fig. (266) Component Browser – Select the component (For Loop)

After selecting the component click Ok or press ENTER

Fig. (267) Interaction page - Set the properties and enter the required data as in the image above

Fig. (268) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (For Loop)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (For Loop)

                Note : Stop typing when you see the required component is selected

Fig. (269) Component Browser – Select the component (For Loop)

After selecting the component click Ok or press ENTER

Fig. (270) Interaction page - Set the properties and enter the required data as in the image above

Fig. (271) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Call Function)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Call Function)

                Note : Stop typing when you see the required component is selected

Fig. (272) Component Browser – Select the component (Call Function)

After selecting the component click Ok or press ENTER

Fig. (273) Interaction page - Set the properties and enter the required data as in the image above

Fig. (274) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (275) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (276) Interaction page - Set the properties and enter the required data as in the image above

Fig. (277) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Call Function)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Call Function)

                Note : Stop typing when you see the required component is selected

Fig. (278) Component Browser – Select the component (Call Function)

After selecting the component click Ok or press ENTER

Fig. (279) Interaction page - Set the properties and enter the required data as in the image above

Fig. (280) Goal Desginer - Steps Tree

Select the step (FOR LOOP ( From LV1 = LV1MIN To LV1MAX Step 1))

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (281) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (282) Interaction page - Set the properties and enter the required data as in the image above

Fig. (283) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Editbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Editbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (284) Component Browser – Select the component (Editbox Class)

After selecting the component click Ok or press ENTER

Fig. (285) Interaction page - Set the properties and enter the required data as in the image above

Fig. (286) Interaction page - Set the properties and enter the required data as in the image above

Fig. (287) Interaction page - Set the properties and enter the required data as in the image above

Fig. (288) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Return Value)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Return Value)

                Note : Stop typing when you see the required component is selected

Fig. (289) Component Browser – Select the component (Return Value)

After selecting the component click Ok or press ENTER

Fig. (290) Interaction page - Set the properties and enter the required data as in the image above

Fig. (291) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Numeric To String)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Numeric To String)

                Note : Stop typing when you see the required component is selected

Fig. (292) Component Browser – Select the component (Numeric To String)

After selecting the component click Ok or press ENTER

Fig. (293) Interaction page - Set the properties and enter the required data as in the image above

Fig. (294) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ALL Trim)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ALL Trim)

                Note : Stop typing when you see the required component is selected

Fig. (295) Component Browser – Select the component (ALL Trim)

After selecting the component click Ok or press ENTER

Fig. (296) Interaction page - Set the properties and enter the required data as in the image above

Fig. (297) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (298) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (299) Interaction page - Set the properties and enter the required data as in the image above

Fig. (300) Interaction page - Set the properties and enter the required data as in the image above

Fig. (301) Interaction page - Set the properties and enter the required data as in the image above

Fig. (302) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Editbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Editbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (303) Component Browser – Select the component (Editbox Class)

After selecting the component click Ok or press ENTER

Fig. (304) Interaction page - Set the properties and enter the required data as in the image above

Fig. (305) Interaction page - Set the properties and enter the required data as in the image above

Fig. (306) Interaction page - Set the properties and enter the required data as in the image above

Fig. (307) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (308) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (309) Interaction page - Set the properties and enter the required data as in the image above

Fig. (310) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (311) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (312) Interaction page - Set the properties and enter the required data as in the image above

Fig. (313) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (314) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (315) Interaction page - Set the properties and enter the required data as in the image above

Fig. (316) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (317) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (318) Interaction page - Set the properties and enter the required data as in the image above

Fig. (319) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (320) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (321) Interaction page - Set the properties and enter the required data as in the image above

Fig. (322) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (323) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (324) Interaction page - Set the properties and enter the required data as in the image above

Fig. (325) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Listbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Listbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (326) Component Browser – Select the component (Listbox Class)

After selecting the component click Ok or press ENTER

Fig. (327) Interaction page - Set the properties and enter the required data as in the image above

Fig. (328) Interaction page - Set the properties and enter the required data as in the image above

Fig. (329) Interaction page - Set the properties and enter the required data as in the image above

Fig. (330) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (331) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (332) Interaction page - Set the properties and enter the required data as in the image above

Fig. (333) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (334) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (335) Interaction page - Set the properties and enter the required data as in the image above

Fig. (336) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (337) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (338) Interaction page - Set the properties and enter the required data as in the image above

Fig. (339) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (340) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (341) Interaction page - Set the properties and enter the required data as in the image above

Fig. (342) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (343) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (344) Interaction page - Set the properties and enter the required data as in the image above

Fig. (345) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (346) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (347) Interaction page - Set the properties and enter the required data as in the image above

Fig. (348) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (349) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (350) Interaction page - Set the properties and enter the required data as in the image above

Fig. (351) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (352) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (353) Interaction page - Set the properties and enter the required data as in the image above

Fig. (354) Interaction page - Set the properties and enter the required data as in the image above

Fig. (355) Interaction page - Set the properties and enter the required data as in the image above

Fig. (356) Goal Desginer - Steps Tree

Select the step (Total Cost Calculation)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Define Function)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Function)

                Note : Stop typing when you see the required component is selected

Fig. (357) Component Browser – Select the component (Define Function)

After selecting the component click Ok or press ENTER

Fig. (358) Interaction page - Set the properties and enter the required data as in the image above

Fig. (359) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ASCII code to Character)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ASCII code to Character)

                Note : Stop typing when you see the required component is selected

Fig. (360) Component Browser – Select the component (ASCII code to Character)

After selecting the component click Ok or press ENTER

Fig. (361) Interaction page - Set the properties and enter the required data as in the image above

Fig. (362) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ASCII code to Character)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ASCII code to Character)

                Note : Stop typing when you see the required component is selected

Fig. (363) Component Browser – Select the component (ASCII code to Character)

After selecting the component click Ok or press ENTER

Fig. (364) Interaction page - Set the properties and enter the required data as in the image above

Fig. (365) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Call Function)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Call Function)

                Note : Stop typing when you see the required component is selected

Fig. (366) Component Browser – Select the component (Call Function)

After selecting the component click Ok or press ENTER

Fig. (367) Interaction page - Set the properties and enter the required data as in the image above

Fig. (368) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (369) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (370) Interaction page - Set the properties and enter the required data as in the image above

Fig. (371) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (372) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (373) Interaction page - Set the properties and enter the required data as in the image above

Fig. (374) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (375) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (376) Interaction page - Set the properties and enter the required data as in the image above

Fig. (377) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (378) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (379) Interaction page - Set the properties and enter the required data as in the image above

Fig. (380) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (381) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (382) Interaction page - Set the properties and enter the required data as in the image above

Fig. (383) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (384) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (385) Interaction page - Set the properties and enter the required data as in the image above

Fig. (386) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Numeric To String)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Numeric To String)

                Note : Stop typing when you see the required component is selected

Fig. (387) Component Browser – Select the component (Numeric To String)

After selecting the component click Ok or press ENTER

Fig. (388) Interaction page - Set the properties and enter the required data as in the image above

Fig. (389) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Numeric To String)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Numeric To String)

                Note : Stop typing when you see the required component is selected

Fig. (390) Component Browser – Select the component (Numeric To String)

After selecting the component click Ok or press ENTER

Fig. (391) Interaction page - Set the properties and enter the required data as in the image above

Fig. (392) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ALL Trim)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ALL Trim)

                Note : Stop typing when you see the required component is selected

Fig. (393) Component Browser – Select the component (ALL Trim)

After selecting the component click Ok or press ENTER

Fig. (394) Interaction page - Set the properties and enter the required data as in the image above

Fig. (395) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ALL Trim)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ALL Trim)

                Note : Stop typing when you see the required component is selected

Fig. (396) Component Browser – Select the component (ALL Trim)

After selecting the component click Ok or press ENTER

Fig. (397) Interaction page - Set the properties and enter the required data as in the image above

Fig. (398) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Call Function)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Call Function)

                Note : Stop typing when you see the required component is selected

Fig. (399) Component Browser – Select the component (Call Function)

After selecting the component click Ok or press ENTER

Fig. (400) Interaction page - Set the properties and enter the required data as in the image above

Fig. (401) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Numeric To String)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Numeric To String)

                Note : Stop typing when you see the required component is selected

Fig. (402) Component Browser – Select the component (Numeric To String)

After selecting the component click Ok or press ENTER

Fig. (403) Interaction page - Set the properties and enter the required data as in the image above

Fig. (404) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Numeric To String)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Numeric To String)

                Note : Stop typing when you see the required component is selected

Fig. (405) Component Browser – Select the component (Numeric To String)

After selecting the component click Ok or press ENTER

Fig. (406) Interaction page - Set the properties and enter the required data as in the image above

Fig. (407) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Numeric To String)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Numeric To String)

                Note : Stop typing when you see the required component is selected

Fig. (408) Component Browser – Select the component (Numeric To String)

After selecting the component click Ok or press ENTER

Fig. (409) Interaction page - Set the properties and enter the required data as in the image above

Fig. (410) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ALL Trim)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ALL Trim)

                Note : Stop typing when you see the required component is selected

Fig. (411) Component Browser – Select the component (ALL Trim)

After selecting the component click Ok or press ENTER

Fig. (412) Interaction page - Set the properties and enter the required data as in the image above

Fig. (413) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (ALL Trim)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (ALL Trim)

                Note : Stop typing when you see the required component is selected

Fig. (414) Component Browser – Select the component (ALL Trim)

After selecting the component click Ok or press ENTER

Fig. (415) Interaction page - Set the properties and enter the required data as in the image above

Fig. (416) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (417) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (418) Interaction page - Set the properties and enter the required data as in the image above

Fig. (419) Goal Desginer - Steps Tree

Select the step (Total Cost Calculation)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Define Procedure)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Procedure)

                Note : Stop typing when you see the required component is selected

Fig. (420) Component Browser – Select the component (Define Procedure)

After selecting the component click Ok or press ENTER

Fig. (421) Interaction page - Set the properties and enter the required data as in the image above

Fig. (422) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Listbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Listbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (423) Component Browser – Select the component (Listbox Class)

After selecting the component click Ok or press ENTER

Fig. (424) Interaction page - Set the properties and enter the required data as in the image above

Fig. (425) Interaction page - Set the properties and enter the required data as in the image above

Fig. (426) Interaction page - Set the properties and enter the required data as in the image above

Fig. (427) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Classes)

                3 - Select the component (Textbox Class)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Textbox Class)

                Note : Stop typing when you see the required component is selected

Fig. (428) Component Browser – Select the component (Textbox Class)

After selecting the component click Ok or press ENTER

Fig. (429) Interaction page - Set the properties and enter the required data as in the image above

Fig. (430) Interaction page - Set the properties and enter the required data as in the image above

Fig. (431) Interaction page - Set the properties and enter the required data as in the image above

Fig. (432) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (433) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (434) Interaction page - Set the properties and enter the required data as in the image above

Fig. (435) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (436) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (437) Interaction page - Set the properties and enter the required data as in the image above

Fig. (438) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (439) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (440) Interaction page - Set the properties and enter the required data as in the image above

Fig. (441) Goal Desginer - Steps Tree

Select the step (Total Cost Calculation)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Structure Programming)

                3 - Select the component (Define Function)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Define Function)

                Note : Stop typing when you see the required component is selected

Fig. (442) Component Browser – Select the component (Define Function)

After selecting the component click Ok or press ENTER

Fig. (443) Interaction page - Set the properties and enter the required data as in the image above

Fig. (444) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Declare Array)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Declare Array)

                Note : Stop typing when you see the required component is selected

Fig. (445) Component Browser – Select the component (Declare Array)

After selecting the component click Ok or press ENTER

Fig. (446) Interaction page - Set the properties and enter the required data as in the image above

Fig. (447) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (448) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (449) Interaction page - Set the properties and enter the required data as in the image above

Fig. (450) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (451) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (452) Interaction page - Set the properties and enter the required data as in the image above

Fig. (453) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (454) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (455) Interaction page - Set the properties and enter the required data as in the image above

Fig. (456) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (457) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (458) Interaction page - Set the properties and enter the required data as in the image above

Fig. (459) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (460) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (461) Interaction page - Set the properties and enter the required data as in the image above

Fig. (462) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (463) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (464) Interaction page - Set the properties and enter the required data as in the image above

Fig. (465) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (466) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (467) Interaction page - Set the properties and enter the required data as in the image above

Fig. (468) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (469) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (470) Interaction page - Set the properties and enter the required data as in the image above

Fig. (471) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (472) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (473) Interaction page - Set the properties and enter the required data as in the image above

Fig. (474) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (475) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (476) Interaction page - Set the properties and enter the required data as in the image above

Fig. (477) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (478) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (479) Interaction page - Set the properties and enter the required data as in the image above

Fig. (480) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Arrays)

                3 - Select the component (Add Item)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Add Item)

                Note : Stop typing when you see the required component is selected

Fig. (481) Component Browser – Select the component (Add Item)

After selecting the component click Ok or press ENTER

Fig. (482) Interaction page - Set the properties and enter the required data as in the image above

Fig. (483) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (484) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (485) Interaction page - Set the properties and enter the required data as in the image above

Fig. (486) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (487) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (488) Interaction page - Set the properties and enter the required data as in the image above

Fig. (489) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (For Loop)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (For Loop)

                Note : Stop typing when you see the required component is selected

Fig. (490) Component Browser – Select the component (For Loop)

After selecting the component click Ok or press ENTER

Fig. (491) Interaction page - Set the properties and enter the required data as in the image above

Fig. (492) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (493) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (494) Interaction page - Set the properties and enter the required data as in the image above

Fig. (495) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (496) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (497) Interaction page - Set the properties and enter the required data as in the image above

Fig. (498) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (499) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (500) Interaction page - Set the properties and enter the required data as in the image above

Fig. (501) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (502) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (503) Interaction page - Set the properties and enter the required data as in the image above

Fig. (504) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (505) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (454) Interaction page - Set the properties and enter the required data as in the image above

Fig. (507) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (508) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (509) Interaction page - Set the properties and enter the required data as in the image above

Fig. (510) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (511) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (512) Interaction page - Set the properties and enter the required data as in the image above

Fig. (513) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (514) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (515) Interaction page - Set the properties and enter the required data as in the image above

Fig. (516) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Control Structure)

                3 - Select the component (IF Statement)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (IF Statement)

                Note : Stop typing when you see the required component is selected

Fig. (517) Component Browser – Select the component (IF Statement)

After selecting the component click Ok or press ENTER

Fig. (518) Interaction page - Set the properties and enter the required data as in the image above

Fig. (519) Goal Desginer - Steps Tree

Select the step (Start Here)

We will start now new interaction process to generate new steps to our steps tree.

The slow way (Using Mouse):

                1 - Click Interact to open the components browser

                2 - Select the domain (Variables)

                3 - Select the component (Assignment)

The fast way (Using Keyboard shortcuts):

                1 - Get the component using its name by typing (Assignment)

                Note : Stop typing when you see the required component is selected

Fig. (520) Component Browser – Select the component (Assignment)

After selecting the component click Ok or press ENTER

Fig. (521) Interaction page - Set the properties and enter the required data as in the image above

Fig. (522) Goal Desginer - Final Steps Tree

3 - Final Steps Tree

The First Step

                Define New Window ( win1 ) , Title : "Optimization of total cost for moubarak pump station"

                                Window Events

                                Window Properties

                                Window Controls

                                                Define Label ( lbl5 ) , Caption : "Working Pumps Range From"

                                                                Label Events

                                                                Label Properties

                                                Define TextBox ( text5 )

                                                                TextBox EVENTS

                                                                TextBox Properties

                                                Define Label ( lbl1 ) , Caption : "To"

                                                                Label Events

                                                                Label Properties

                                                Define Label ( lbl2 ) , Caption : "Working Hours Range From"

                                                                Label Events

                                                                Label Properties

                                                Define Label ( lbl3 ) , Caption : "To"

                                                                Label Events

                                                                Label Properties

                                                Define TextBox ( text1 )

                                                                TextBox EVENTS

                                                                TextBox Properties

                                                Define TextBox ( text2 )

                                                                TextBox EVENTS

                                                                TextBox Properties

                                                Define TextBox ( text3 )

                                                                TextBox EVENTS

                                                                TextBox Properties

                                                Define New Button ( btn1 ) , Caption : "Clear History"

                                                                Button Events

                                                                                Event: ON CLICK : Action clearhis()

                                                                Button Properties

                                                Define New Editbox ( edit1 )

                                                                Editbox Events

                                                                Editbox Properties

                                                Define TextBox ( text4 )

                                                                TextBox EVENTS

                                                                TextBox Properties

                                                Define New Button ( btn2 ) , Caption : "Minimum Cost"

                                                                Button Events

                                                                                Event: ON CLICK : Action myoptibtn()

                                                                Button Properties

                                                Define Label ( lbl6 ) , Caption : "Mode"

                                                                Label Events

                                                                Label Properties

                                                Define Combobox ( combo1 ) , Items : {"Design Mode","Max. Discharge","Max. Efficiency"}

                                                                Combobox Events

                                                                Combobox Properties

                                                Define TextBox ( text6 )

                                                                TextBox EVENTS

                                                                TextBox Properties

                                                Define Label ( lbl7 ) , Caption : "Min. Cost (Absolute)"

                                                                Label Events

                                                                Label Properties

                                                Define New ListBox ( list1 )

                                                                ListBox Event

                                                                ListBox Properties

                                                START OF MAIN MENU

                                                                MENU POPUPS

                                                                                DEFINE POPUP "File"

                                                                                                POPUP ITEMS

                                                                                                                Define ITEM ( "Exit" )

                                                                                                END OF POPUP

                                                                                END OF POPUP

                                                                END OF MAIN MENU

                                                Define New Statusbar

                                                                Items

                                                                                Date

                                                                                                Events

                                                                                                Properties

                                                                                Clock

                                                                                                Events

                                                                                                Properties

                                                                                Keyboard

                                                                                                Events

                                                                                                Properties

                                                                End Statusbar

                                End Of Window

                                win1.Center ( )

                                win1.text4.Enabled := False

                                win1.combo1.Value := 1

                                win1.text6.Enabled := False

                                Public amcfirst,amcvalue,amcstr

                                amcfirst = True

                                amcvalue = 0

                                amcstr = ""

                                Activate window

Total Cost Calculation

                Define Function mycalc ( p1,p2 )

                                Start Here

                                                c1 = 86

                                                c2 = 52.7

                                                prated = 12000

                                                IF ( win1.combo1.value = 1 )

                                                                Start Here

                                                                                eff = 0.90

                                                                END OF IF STATEMENT

                                                IF ( win1.combo1.value = 2 )

                                                                Start Here

                                                                                eff = 0.93

                                                                END OF IF STATEMENT

                                                IF ( win1.combo1.value = 3 )

                                                                Start Here

                                                                                eff = 0.97

                                                                END OF IF STATEMENT

                                                myret = (c1*prated*p1)+(c2*eff*prated*p2*p1)

                                End of Function (Return myret)

                Define Procedure myoptibtn

                                Start Here

                                                LV1MIN = WIN1.TEXT5.Value

                                                LV1MAX = WIN1.TEXT1.Value

                                                LV2MIN = WIN1.TEXT2.Value

                                                LV2MAX = WIN1.TEXT3.Value

                                                IF ( win1.combo1.value = 1 )

                                                                Start Here

                                                                                IF ( lv1min < 16 .or. lv1max > 18 )

                                                                                                Start Here

                                                                                                                Show Message "Number of pumps is out of range (16-18)" Title "Sorry" Type: Message Box

                                                                                                                Return 0

                                                                                                END OF IF STATEMENT

                                                                                QPC = 16.7

                                                                END OF IF STATEMENT

                                                IF ( win1.combo1.value = 2 )

                                                                Start Here

                                                                                IF ( lv1min < 12 .or. lv1max > 18 )

                                                                                                Start Here

                                                                                                                Show Message "Number of pumps is out of range (12 to 18)" Title "Sorry" Type: Message Box

                                                                                                                Return 0

                                                                                                END OF IF STATEMENT

                                                                                QPC = 25

                                                                END OF IF STATEMENT

                                                IF ( win1.combo1.value = 3 )

                                                                Start Here

                                                                                IF ( lv1min < 14 .or. lv1max > 18 )

                                                                                                Start Here

                                                                                                                Return 0

                                                                                                END OF IF STATEMENT

                                                                END OF IF STATEMENT

                                                                QPC = 21

                                                Call Procedure mygen

                                End of Procedure

                Define Procedure mygen

                                Start Here

                                                new = Get character of ASCII Code 13

                                                line = Get character of ASCII Code 10

                                                MYLV1 = ""

                                                MYLV2 = ""

                                                myresult = "Total cost = F ( Pumps , Hours )" + new + line

                                                mymtc = mycalc(LV1MIN,LV2MIN)

                                                MYMTCL = True

                                                FOR LOOP ( From LV1 = LV1MIN To LV1MAX Step 1)

                                                                Start Here

                                                                                FOR LOOP ( From LV2 = LV2MIN To LV2MAX Step 1)

                                                                                                Start Here

                                                                                                                out = Call Function TESTHOUR ( LV1,LV2 )

                                                                                                                IF ( OUT = True )

                                                                                                                                Start Here

                                                                                                                                                out = Call Function MYRESULT ( LV1,LV2 )

                                                                                                                                END OF IF STATEMENT

                                                                                                End of For Loop

                                                                End of For Loop

                                                                IF ( MYMTCL = True )

                                                                                Start Here

                                                                                                win1.edit1.Value := myresult

                                                                                                Return 0

                                                                                END OF IF STATEMENT

                                                mymtc2 = CONVERT mymtc TO STRING

                                                mymtc2 = All Trim mymtc2

                                                win1.text4.Value := mymtc2 + " = F ( " + MYLV1 + " , " + MYLV2 + ")"

                                                win1.edit1.Value := myresult

                                                IF ( win1.combo1.value = 1 )

                                                                Start Here

                                                                                mymode = "Design Mode : "

                                                                END OF IF STATEMENT

                                                IF ( win1.combo1.value = 2 )

                                                                Start Here

                                                                                mymode = "Max. Discharge : "

                                                                END OF IF STATEMENT

                                                IF ( win1.combo1.value = 3 )

                                                                Start Here

                                                                                mymode = "Max. Efficiency : "

                                                                END OF IF STATEMENT

                                                win1.list1.AddItem ( mymode + win1.text4.value )

                                                IF ( amcfirst = True )

                                                                Start Here

                                                                                amcvalue = mymtc

                                                                                amcstr = mymode + win1.text4.value

                                                                                amcfirst = false

                                                                END OF IF STATEMENT

                                                IF ( mymtc < amcvalue )

                                                                Start Here

                                                                                amcvalue = mymtc

                                                                                amcstr = mymode + win1.text4.value

                                                                END OF IF STATEMENT

                                                win1.text6.Value := amcstr

                                End of Procedure

                Define Function myresult ( LV1,LV2 )

                                Start Here

                                                new = Get character of ASCII Code 13

                                                line = Get character of ASCII Code 10

                                                myntc = Call Function mycalc ( LV1,LV2 )

                                                IF ( MYMTCL = True )

                                                                Start Here

                                                                                MYMTCL = False

                                                                                MYMTC = MYNTC

                                                                END OF IF STATEMENT

                                                IF ( MYNTC <= MYMTC )

                                                                Start Here

                                                                                MYLV1 = LV1

                                                                                MYLV2 = LV2

                                                                                MYLV1 = CONVERT MYLV1 TO STRING

                                                                                MYLV2 = CONVERT MYLV2 TO STRING

                                                                                MYLV1 = All Trim MYLV1

                                                                                MYLV2 = All Trim MYLV2

                                                                END OF IF STATEMENT

                                                mymtc = Call Function min ( mymtc,myntc )

                                                CV1 = CONVERT myntc TO STRING

                                                CV2 = CONVERT LV1 TO STRING

                                                CV3 = CONVERT LV2 TO STRING

                                                CV2 = All Trim CV2

                                                CV3 = All Trim CV3

                                                myresult = myresult + CV1 + " = F ( " + CV2 + " , " + CV3 + ")" + new + line

                                End of Function

                Define Procedure clearhis

                                Start Here

                                                win1.list1.DeleteAllItems ( )

                                                win1.text6.Value := ""

                                                amcfirst = True

                                                amcvalue = 0

                                                amcstr = ""

                                End of Procedure

                Define Function testhour ( p1,p2 )

                                Start Here

                                                Declare Array qreq

                                                Add item 92.59 To Array qreq

                                                Add item 128.82 To Array qreq

                                                Add item 163.08 To Array qreq

                                                Add item 163.08 To Array qreq

                                                Add item 199.31 To Array qreq

                                                Add item 265.63 To Array qreq

                                                Add item 259.61 To Array qreq

                                                Add item 233.45 To Array qreq

                                                Add item 159.03 To Array qreq

                                                Add item 128.82 To Array qreq

                                                Add item 120.72 To Array qreq

                                                Add item 92.59 To Array qreq

                                                hmin = (qreq[1] * 24) / (QPC * p1)

                                                hmax = hmin

                                                FOR LOOP ( From x = 1 To 12 Step 1)

                                                                Start Here

                                                                                hnew = (qreq[x] * 24) / (QPC * p1)

                                                                                IF ( hnew < hmin )

                                                                                                Start Here

                                                                                                                hmin = hnew

                                                                                                END OF IF STATEMENT

                                                                                IF ( hnew > hmax )

                                                                                                Start Here

                                                                                                                hmax = hnew

                                                                                                END OF IF STATEMENT

                                                                End of For Loop

                                                myret = False

                                                IF ( p2 >= hmin .and. p2 <= hmax )

                                                                Start Here

                                                                                myret = True

                                                                END OF IF STATEMENT

                                                IF ( myret = false )

                                                                Start Here

                                                                                MYRESULT = MYRESULT + " F ( " + alltrim(str(P1)) + "," + alltrim(str(P2)) + ")" + " hours out of range (" + alltrim(str(hmin)) + "," + alltrim(str(hmax)) + ")" + chr(13) + chr(10)

                                                                END OF IF STATEMENT

                                End of Function (Return myret)

4 - Application during the runtime

Fig. (523) Application during the runtime